Helsinki energy consumption

This page is a variable. The page identifier is Op_en7317
Moderator:Nobody (see all) Click here to sign up.
This page is a stub. You may improve it into a full page, and then a rating bar will appear here.
Upload data

Many pieces of data on this page came originally from Building stock in Helsinki, worked by the Decision analysis and risk management 2015 course.

Question

How much is energy consumed and to what purposes in Helsinki?

Rationale

U values based on overall data

The total heat consumption by district-heated buildings is 6921.65 GWh in 2013 (see below). We can derive the total energy efficiency value expressed as W /m² /K for floor area and temperature difference between indoors and outdoors. The typical energy efficiency calculations (using the so called U value) assume that outdoor 17 °C is thermoneutral and lower values require heating. The total floor area of district-heated buildings is 38990000 m² in 2015 according to the Helsinki energy decision 2015 model. The annual average temperature in Helsinki is 4.8 °C [1] and during heating season Sep-May 1.4 C (Opasnet data). Therefore the energy efficiency value (approximate U value) is

Failed to parse (Missing <code>texvc</code> executable. Please see math/README to configure.): U = \frac{6921.65 GWh/a /(24 h / d \times 365 d/a)}{38990000 m^2 (17 K - 4.8 K)} = 1.661 \frac{W}{m^2 K}

The annual average ambient temperature is 2.5 °C in Kuopio (Ambient temperature in Urgenche cities). Therefore, we could use hourly temperature data from Kuopio if we add the temperature difference 2.3 K. Graphs of the data.

+ Show code- Hide code ## This is code is Op_en7317/temperatures [[Helsinki energy consumption]] library(OpasnetUtils) ta <- opbase.data("Op_en6315", subset = "2014-5/2015") hours <- as.character(ta$Date) if(!exists("server")) { dates <- data.frame( EN = c("Jan", "Feb", "Mar", "Apr", "May", "Jun", "Jul", "Aug", "Sep", "Oct", "Nov", "Dec"), FI = c("Tammi", "Helmi", "Maalis", "Huhti", "Touko", "Kesä", "Heinä", "Elo", "Syys", "Loka", "Marras", "Joulu") ) for(i in 1:nrow(dates)) { hours <- gsub(dates$EN[i], dates$FI[i], hours) } } hours <- as.POSIXct(strptime(hours, format = "%Y-%b-%d %H:%M:%S")) hours <- hours + as.difftime(as.character(ta$Time), format = "%H:%M") # Adjust temperature data: 2.3 C is the average difference between Kuopio and Helsinki hours <- data.frame(Time = hours, Result = as.numeric(as.character(ta$Result)) + 2.3) hours <- hours[!is.na(hours$Result) , ] hours$Date <- as.POSIXct(strptime(format(hours$Time, "%Y-%m-%d"), format = "%Y-%m-%d")) hours <- hours[hours$Time >= as.POSIXct("2014-03-01 00:00:00") & hours$Time < as.POSIXct("2015-03-01 00:00:00") , ] days <- aggregate(hours["Result"], hours["Date"], FUN = mean) days$Temperature <- cut(days$Result, breaks = seq(-30, 33, 3)) temperatures <- Ovariable("temperature", data = aggregate(days["Result"], days["Temperature"], FUN = mean)) temperdays <- Ovariable("temperdays", data = aggregate(days["Result"], days["Temperature"], FUN = length)) objects.store(temperatures, temperdays) cat("Objects temperature, temperdays stored.\n") #ggplot(hours, aes(x = Time, y = Result))+geom_line() + geom_point(data = days, aes(x = Date, y = Result, colour = "Daily mean", size = 2)) #ggplot(hours, aes(x = Time, y = Result))+geom_point()

Energy parametres of buildings

Existing situation of important energy parametres in the building stock (%).

Property	Residential buildings	Description
Wall insulation	17	Default building data - Helsinki.xlsx and CyPT Data collection - To Jouni.pptx
High efficient glazing	35	Energy performance class A in building automation and www.siemens.com
Efficient lighting in baseline	1.4	Default building data - Helsinki.xlsx
Demand oriented lighting	26.9	Default building data - Helsinki.xlsx
Building Efficiency Monitoring
Building Remote Monitoring
Building Performance Optimization
Demand controlled ventilation	16.2 - 22.4	Default building data - Helsinki.xlsx: Non-residential, cell C35
Heat and Cold Recovery in ventilation	17.8
Efficient Motors
Building Automation BACS Class C
Building Automation BACS Class B
Building Automation BACS Class A
Room Automation HVAC	30	www.siemens.com
Room Automation HVAC + lighting
Building Automation HVAC + lighting + blinds	60	www.siemens.com

Description of parametres:

• Wall Insulation: Building outside walls with a thermal transmission coefficient < 0.5(W/(m²*k)
• High efficient glazing: Building outside windows with a thermal transmission coefficient < 1(W/(m²*k
• Efficient lighting: Building with lighting technology with an efficiency of >75lumen/Watt
• Demand oriented lighting: Buildings with a lighting regulation that controls the presents of users and/or the incident sun light to dim or shut off the lighting to save electricity.
• Efficient Motors: Buildings that are equipped with pressure regulated variable speed drives for heating circulation pumps or ventilation drives.
• Building Remote Monitoring: Buildings with metering and remote evaluation of energy demand, so that an professional engineer can evaluate the energy demand and the need for maintenance and improvement measures
• Building Performance Optimization: Buildings with an optimization contract, where an professional engineer can start maintenance and improvement measures
• Demand controlled ventilation: Buildings with a ventilation regulation that controls the air quality (e.B.CO2) to slow down or shut off the ventilation when it is not needed to save electricity.
• Heat and Cold Recovery in ventilation: Buildings where the heat/cold of the exhaust air is recovered by a heat exchanger to precondition the fresh air to save energy for cooling/heating.
• Room Automation HVAC: Buildings where the heating/ventilation/Air Condition demand is regulated to the demand of every single room to prevent energy demand for not used rooms.

Notes

Data from:

• CyPT Data collection - To Jouni
• Default Building Data - Helsinki
• Energy performance class A in building automation www.siemens.com [2]

The numbers found are not reliable but most of the high technology buildings such as insulated walls, windows.... are started to build from 10 to 15 years ago, so if we could find the building area in the year 2000, we could subtract that from the building area in Helsinki at the moment and get the building area which is built during these 10-15 years and they are high tech building areas with regard to 2 % renovation rate and rebuilding which is on going every year which should be added to the total amount.

Technical notes: Sheets 5_Input Residential, 6.0_Input Non Residential, 6.2_Input Public Admin. Priority 1. Auxiliaries PPT.

Energy demand

Different energy sinks by building type (kWh /m2 /a). 0 = not known.

Energy type	Use	Residential	Other	Public	Industry
Cooling	Infiltration	0	0	0	0
Cooling	Ventilation	0	0	0	9
Cooling	Losses through walls through transmission	0	0	0	0
Cooling	Heat input by solar radiation through windows	0	0	0	0
Cooling	Losses through windows through transmission	0	0	0	0
Cooling	Other effects (e.g. people, electrical Appliances)	0	0	0	0
Heating	Infiltration	0	0	0	0
Heating	Ventilation	29.19	27.56	27.22	27.22
Heating	Walls	34.75	32.81	32.4	32.4
Heating	Windows	15.49	14.63	14.44	14.44
Heating	Floors	8.74	8.25	8.15	8.15
Heating	Roofs	9.33	8.81	8.7	8.7
Heating	Other	0	0	0	0
Heating	Warm water	1.89	0	1.76	1.76
Electricity	Lighting	2.82	20.05	49.68	8.67
Electricity	Appliances	24.84	18.74	14.19	13
Electricity	Ventilation	0	12.03	21.29	18.24
Electricity	Other	0.56	23.69	56.77	51.76

Notes

• Data from Climate policies Helsinki additional data
• We went through the data mentioned above and also the files given in Climate policies Helsinki data but could not find the data for cooling, heating:infiltration, heating:other, heating:warm water:other and electricity:ventilation:residential.
• Total estimated amount of energy needed for cooling 23504480 kWh/a (whole Helsinki). Based on [3] 14332 GWh/a for housing (total energy demand minus traffic 18 % [4] and [5] 2 % of total energy demand of housing used for cooling. Total floor area of Helsinki needed (table 1).

Technical notes: Sheets 5_Input Residential, 6.0_Input Non Residential, 6.2_Input Public Admin. Priority 1. Auxiliaries: see table.

Efficiency increase

Changes in energy efficiency of different energy sinks.

• Cooling 2 % /a
• Warm water heating 1.1 % /a in residential buildings
• General improvement: 0.6 % /a: Estimated 3 % of houses renovated/year and 20 % increase in energy efficiency when renovated. [6] Data apart from 0.6% values from Climate policies Helsinki additional data
• The presentation about tables 4 and 5 PresentationHW9

Technical notes: Sheets 5_Input Residential, 6.0_Input Non Residential, 6.2_Input Public Admin. Priority 3. Auxiliaries Excel.

Heating parameters of buildings

Important energy parameters

Parameter	Value	Table	Description
Efficiency increase of U values walls 1/a	0.019642857	u.factor	(0.28-0.17)/0.28/(2010-1990)
Efficiency increase of U values windows 1/a	0.014285714	u.factor	(1.4-1)/1.4/(2010-1990)
U value wall W/m2/K	0.17-0.28	u.factor	values for buildings built 1990-2010
U value window W/m2/K	1.0-1.4	u.factor	values for buildings built 1990-2010
G value %	70	sun.heat.absorption.parameters
Ratio of wall/effective area	0.647727273	surface.area	year 2010: 114/176
Ratio of window/effective area	0.1	surface.area	year 2010: 17.6/176

Notes

• Data used: Unit heat consumption of buildings in Finland.
• Data Climate policies Helsinki additional data only contained 0.00 for all the parameters.
• EU legislation value for U-value of windows in the document below was 1.0, so we used it for building buildings and the past years' values for the non-residential buildings. We assumed this will be the new residential buildings to be within the legislative value.
• HW9 table 6 presentation: Helsinki Building Stock

Technical notes: Sheets 5_Input Residential, 6.0_Input Non Residential, 6.2_Input Public Admin. Priority 3. Auxiliaries: see table.

Values derived from Unit heat consumption of buildings in Finland (these could be used to update Table 6):

Consumption statistics

Total energy consumption in Helsinki in 2013 (GWh)

	Lämpökorjattu	Lämpökorjaamaton
Kaukolämpö	6921,65	6461,00
Erillislämmitys	303,89	284,01
Sähkölämmitys	339,23	316, 65
Kulutussähkö	3988,10	3988,10
Henkilöautot	1294,06	1294,06
Muu tieliikenne	794,33	794,33
Junat	111,16	111,16
Laivat	432,12	432,12
Teollisuus ja työkoneet	147,60	147,60
Yhteensä	14332,14	13829,03

See also

• Helsingin parhaat energiatehokkuuskäytännöt -työryhmän loppuraportti (2011-2013)